Pages

Monday, 7 November 2016

How I do my binding

I always machine bind my quilts. Always.
As I started to learn how to quilt I looked at tutorials on how to bind your quilts and hand binding just never appealed to me. Not that I don't like the look of it, I just don't like sewing by hand, no matter what it is, and I simply don't trust my own hand sewing abilities.

So I have tried out different ways of machine binding. This one here is how I started off. But I didn't like how visible the seam was at my quilts at the front.
After a couple of quilts I have found a method that really works for me and that looks neat at well.

Here is a little tutorial of the binding of my October quilt:


1.) First of all I secure all the edges after squaring off my quilt. I use my 1/4'' foot and sew all the way round.


2.) I roll up my binding. Little tutorial here.


 3.) I attach the binding using my regular sewing foot, that is just a little bit further away from the edge than 1/4'', approx. 3/8''. 


Here you can see the 1/4'' seam line from squaring off the quilt, and the seam of attaching the binding. 


4.)  Secure the binding with pins from the front of your quilt, making sure that the binding at the back is pinned as well. Visible here are also the two seams: 1/4'' seam from securing the quilt and the approx. 3/8'' from attaching the binding. Make sure the binding covers both seam lines.


5.) Use a lot of pins at the front of your quilt. A LOT! Basically there is pin beside pin. That ensures that all the binding is gripped and it will be entirely sewn on to the quilt.
Have them facing all in one direction upwards, so that you can easily remove them while sewing along the binding.


6.) Sew the binding on from the top of your quilt, remove pins as you go. Make sure you don't sew over the pins, that could break the needle in your sewing machine!
Go very, very slowly. Make sure you sew as close to the binding as possible. Use a matching thread so it's not that visible, neither from the quilt top nor from the back. (Sometimes that can be difficult, but use whatever looks right and is the least visible.)

Take your time! Sewing the binding and attaching it takes me a whole afternoon, like 4-5 hours or so for a lap size quilt. You hand-sewn-binding-people are probably laughing at me know, because I could imagine that hand sewing your binding takes about the same time. 

Machine binding is not fast. Preparation is key with this method. I usually use my left index finger and put it beside the binding when I sew along the binding. I've gotten quite good in feeling the edge of the binding through the quilt top. If I cannot feel it I pull the binding a bit across.

And this is how it looks from the top of the quilt:


The seam is barely visible. Yes, it's all beige but I have done white thread with white binding on dark quilts tops and that works, too.

And the look from the back:


Sometimes I miss sections of the binding, as you cannot see the edge from the top. I used to hand sewn that left out section then, but meanwhile I just go over it again, with the machine. Yep, that's how lazy I am. I have about two to three sections (probably 1 inch long or smaller) at every quilt where I didn't catch the binding, but that's ok with me. And I swear the 'double seam' is not visible. 

The corners turn out ok, I'm happy with that. 


All in all this is a very neat way to attach your binding. It takes practice, as everything, but I really like the sturdiness of the binding and this will definitely not come off!


If you have questions about this tutorial just get in touch.  

Linking this to Modern Patch Monday at Modern Cologne Quilters

5 comments:

  1. Liebe Daniela,

    da musste ich jetzt wirklich schmunzeln. Ich schaffe per Hand in 1 Stunde 2,5-3 Meter. Aber wenn Du natürlich nicht gern mit der Hand nähst, versteh ich dass. Ich mach das auch ab und zu mit der Maschine. Aber ich ärger mich immer, wenn es nicht auf beiden Seiten absolut perfekt gleich vom Rand entfernt ist.

    LG Mareike

    ReplyDelete
  2. Liebe Daniela,
    DANKE!!! Ich bin nicht alleine. Ich hasse es, das Binding mit der Hand anzunähen. Es gibt sigar einen großen Quilt, der deswegen noch rumliegt. Bescheuert, oder? Ich muss ihn mal rauskramen und endlich ein Binding annähen. *gg* bis auf die vielen Nadeln mache ich es gerne genauso wie du. Ich benutze WonderClips. Aber mir gehen dann meist mehr Stellen als dir diech die Lappen.
    LG, Rike

    ReplyDelete
  3. Hallo Daniela,
    I also do not like to sew the sewing with my hand. I also attach it with the machine or sometimes some nice MCQs do the hand sewing for me. On my last quilt I attached the binding with a zigzag stitch and even with that I missed some parts of the binding. But it is no problem to go over it again.
    Viele Grüße
    Martina

    ReplyDelete
  4. Liebe Daniela, danke Dir für das Tutorial. Ich habe einmal einen Quilt mit Hand angenäht und konnte darnach 1 Woche nicht mehr die Hände rühren! Die Idee, ds Binding zuerst mit dem normalen Füsschen zu machen, klingt sehr gut. Es gibt Füsschen, die in der Mitte eine Schiene haben (super für stich in the ditch), die sind super um einen gleichmäßigen Abstand einzuhalten bzw. um knappkantig abzunähen. Sieht dann sehr gleichmäßig aus. Liebe Grüße Christiane

    ReplyDelete
  5. I basically use the same method. Though I also use wonderclips instead of pins and sometimes an additional pin at the corners. After three or four quilts one also gets better and I rarely miss binding now. And I use the stich in the ditch foot "momi" mentioned. I can sew quite fast with that and still have an almost invisible sewing line on the front :)

    ReplyDelete